W61-700 Organosilicone High-temperature Resistance And Anticorrosive coating(Primer/cover three components) Product description ØBased on organosilicone resin, curing agent and C component. ØPrimer and cover coating are packaged into three components or with A and B two components. ØExcellent resistance of heat and temperature exchanging. Can bear 500 for long term. ØExcellent adhesive attraction of the primer and the cover. ØExcellent resistance to become old, water and wet. ØCan dry itself in normal temperature. Short-time to dry. Recommended uses Used as high-temperature equipments, eg. the cover of the motor, flue, vent-pipe, heat exchanger. Physical parameter ColorPrimer: Iron red; Cover: dark green GlossMat grossy Theoretic coveragePrimer: 100g/; Cover: 100g/ Specific gravityPrimer: 1.36/; Cover: 1.41 Desiccation time23±2: Primer: surface dryness≤0.5h, Actual dryness≤24hSolidfy23±2: 7 days Flash point40 Store period6 months Attention Ø Base surface must be treated by sand blasting to ensure the adhesive. Ø If the foregoing layer has been painted too long, the layer should be roughed by waterproof abrasive paper to clean the pollution. Ø All the tools should be cleaned. Do not mix any water or other impurity. The paint must be used within 8 hours after mixed. Ø Protect the film before it doesnt solidfy. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specifications A: 20kg in 20L container, B: 0.8kg in 1L container, C: 20kg in 20L container anticorrosive coating, silicone coating, anti-corrosion coating