S52-40 Polyurethane Finish Coating (outdoors type

S52-40 Polyurethane Finish Coating (outdoors type, two component) Product description ØBased on Hydroxyl resin, curing agent, climate resistance pigment. Polyurethane coating. ØTwo component packaged. ØExcellent performance of the resistance of oil, solvent, water, boiled water, sea water, acid, alkali, salts and corrosive gas ØGood climate stability ØExcellent wearing quality, hard, brightness. Recommended uses Ø As anti-corrosive cover paint for steel structure. Ø Suitable for wood and cement products. Physical parameter ColorAll color Gloss Glossy Theoretic coverage120g/ (Due to the color) Specific gravityAbout 1.33 Desiccation time23±2: surface dryness≤2h, Actual dryness≤24h Absolute solidification23±2: 7 days Flash pointA component: 25, B component: 30 Storage6 months Operation description Mixing ratioA: B = 4:1 Curing time23±2: 20 minutes Applicable time23±2: 8 hours ThinnerX-10 Polyamide paint thinner Operation methodAirless spraying Air spraying Manual brushing /Roller coat Max capacity of dilution≤5% Spout size20P20 Spray pressure150kg/C (spray-paint just for reference, adjust in actual use)Tool cleaningX-10 Polyamide paint thinnerFilm thicknessWet film: 90um Dry film: 35um Attention Ø Temperature of the base material should 3 higher than the dew point and the RH should below 85%. Stop operating when raining, snowing, fog and heavy dust. Ø Adopt airless spraying, air spraying, manual brushing /roller coat; Different methods require different thinner. Forbidden using water, amyl acetate, sterols, and petrol as thinner. Ø Its chemical reaction paint. Mixing around fully before operating according to the stated quota. Curing for 20 minutes before operating under 25 35. If temperature below 25, curing time should be expended. Use all the paint after curing up in 4 8 hours to avoid wasting. Ø The package should be hermetic closure. Or it will metamorphose. Ø The film will solidify in 7 days before using. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specifications A: 20kg in 20L container, B: 5kg in 5L container anticorrosive coating, polyurethane coating, steel coating