HL52-7 Epoxy Coal Tar Pitch Pipe Anticorrosive coa

HL52-7 Epoxy Coal Tar Pitch Pipe AnticorrosiveCoating (high build paint) Product description Ø Based on epoxy resin, coal tar pitch, filler, pigment, solvent, curing agent etc, ØA, B two component packaged. B component is the universal primer curing agent ØExcellent antirust and resistance against chemical solution corrosion ØExcellent resistance against abrasion, water, seawater, salt fog, Good physical and mechanical properties with hard film. Outstanding insulativity, water penetrability resistance, anti-micro-biologic corrosion; anti-separating electric current, ØExcellent temperature shock resistance, heat resistant, anticorrosion.Excellent temperature shock resistance, heat resistant, anticorrosion. Recommended uses Ø Anticorrosion protecting for steel structure and concrete in dry-wet changing environment or underwater condition. ØAnticorrosion protecting for underground pipe, inner wall of liquid storing tank or bottom of the tank. Physical parameter ColorPrimer: Brick red; Finishing coat: Black Gloss Primer: Matt; Finishing coat: Glossy Theoretic coveragePrimer: 200g/; Finishing coat: 250g/ Specific gravityPrimer: About 1.38; Finishing coat: About 1.3 Desiccation timePrimer: 23±2: surface dryness≤4h, Actual dryness≤24h Finishing coat: 23±2: surface dryness≤4h, Actual dryness≤24h Absolute solidification23±2: 7 days Flash pointPrimer: A component 22; Finishing coat:: A component 20 Storage12 months Attention Ø A component should be mixed up fully before confecting. Ø The ratio of the curing agent due to the temperature changing. According to the appointed ratio. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specifications A: 50kg in 50L containerB(Primer): 3.06kg in 5L container, B(Finish coating): 3.42kg in 5L container pipe coating, epoxy resin coating, anticorrosive coating