H52-2 Epoxy Thick Slurry Finish Paint (two compone

H52-2 Epoxy Thick SlurryFinish Paint(two component) Product description ØBased on epoxy resin, light fastness filler and pigment, dispersant and curing agent. ØA, B two component packaged. ØExcellent adhesive attraction, flexible, abrasive resistance and shock resistance. ØExcellent resistance of alkali, water, oil and chemicals. ØResistance to elements is little worse. The surface will pulverization after long time insolating. Recommended uses Heavy anticorrosion finishing coating of the steel structure building. Physical parameter ColorAll color Gloss Glossy Theoretic coverage300g/ Specific gravityAbout 1.14 Desiccation time23±2: surface dryness≤4h, Actual dryness≤24h Absolute solidification23±2: 7 days Flash point27 Storage12 months Operation description Mixing ratioA (paint): B (curing agent) = 18:5 Curing time23±2: 0.5 1 hour Applicable time23±2: 8 hours ThinnerX-7 epoxy paint thinner Operation methodAirless spraying Air spraying Manual brushing /Roller coat Max capacity of dilution5%10%3%Spout size0.4-0.5mm2.0-2.5mm-Spray pressure15-20Mpa0.3-0.5Mpa-Tool cleaningX-7 epoxy paint thinnerFilm thicknessWet film: 190μm Dry film: 100μm AttentionØ It can be used only after the film solidified fully. Ø If expending the max operation interval, the forgoing paint should be burnished till rough. Ø Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary. Packing specificationsA: 18kg in 20L container, B: 5kg in 10L container epoxy resin coating,anticorrosive coating,heavy-duty anticorrosive coating